50HP fixed speed belt driven compressor

 

The 50HP fixed speed belt driven compressor is a medium-to-large screw air compressor device driven by a three-phase 380V industrial frequency power supply. Its core component is a 50 horsepower (about 37kW) motor driving a twin-screw main engine through a belt drive system, with a displacement of up to 6.2m³/min (0.8MPa working condition) and an energy efficiency performance of less than 3.2kW/(m³/min). Its belt drive design can effectively absorb impact loads and adapt to voltage fluctuations of ±10%. The 2 Stage Compressor is equipped with a two-stage filtration system and an intelligent controller as standard, which is suitable for continuous air supply scenarios such as textile and automotive parts manufacturing. The maintenance cycle can reach 4000-5000 hours, and the comprehensive energy efficiency is 3-5% higher than that of the same power direct-connected model. It is the preferred solution for medium-sized industrial enterprises to stabilize air supply and control energy consumption.

 

The core advantage of the 50HP industrial frequency belt screw air compressor is that the belt drive buffer design effectively reduces the impact wear between the motor and the main engine, thereby extending the life of the equipment (maintenance cycle is up to 4000-5000 hours); its 37kW industrial frequency motor can adapt to ±10% voltage fluctuations and maintain a stable air supply at a speed of 6.2m³/min (0.8MPa), which is 3-5% more energy efficient than the direct-connected type; at the same time, it has multi-machine intelligent control capabilities and can flexibly respond to the ever-changing load requirements of scenarios such as automotive spraying and textile winding. With its comprehensive cost-effectiveness and reliability, it has become the preferred solution for medium-sized industrial enterprises.